Apple 825-0737-A 
-Open and remove the top-case, installed cards, cables and whole motherboard.
– Install the battery adapter using the clamp and a screw (mind the orientation) – thru the board in the socket hole reserved for it at G14 (See: Figure L and board diagram)
– Install the chip to location B3
– Install the wiring thru the hole in metal casing close to speaker.
– Attach the wiring to the battery holder: red wire in top and black in bottom (see picture).
– Install the battery holder next to the speaker.
– Install 3x AA sized batteries and mind the polarity (red = positive, black = negative).
Skip to content
